 |
Chassis & mast assembly thoroughly
steam cleaned |
|
Hydraulic system checked and repaired
as necessary |
|
Electronic panels inspected, with
contact tips replaced as required |
|
Motors inspected, brushes replaced
as necessary |
|
Full service carried out, to include
forks & chain inspection & thorough examination as required
under Health & Safety Legislation |
|
Brake operation checked and repaired
as necessary |
|
Tyres re-cut or service tyres fitted |
|
Machine load tested to rated capacity |
|
Machine re-sprayed and new decals
fitted |
|
Final independent quality inspection
carried out |
|
Machine thoroughly inspected |
|
Chassis totally cleaned and all damage
repaired |
|
Brake system stripped and components
replaced as required |
|
Oil pressure relating to all major
components, i.e. engine, hydraulics and driveline are checked.
These will be adjusted and, where required, brought within tolerance |
|
All motors removed and electronically
tested and overhauled, including brushes, bearings and commutator
cleaned |
|
Electronic control panel removed,
inspected & cleaned with wiring and components replaced
as necessary |
|
Mast assembly will be stripped and
re-shimmed, with rollers replaced as required |
|
New seat and seat restraint fitted |
|
New lift chains fitted |
|
New tyres fitted |
|
New forks fitted |
|
Full service carried out, to include
thorough examination, as required under Health & Safety
Legislation |
|
Machine load tested to rated capacity |
|
Machine will undergo full re-spray
including 2 undercoats and topcoats as necessary |
|
New decals fitted |
|
Final independent quality inspection
carried out |
